 |
Comprehensive Troubleshooting Tools for IT Administrators
The AdventNet ManageEngine OpUtils is a comprehensive set
of 40+ unique system and network monitoring tools. This web-based
software helps network engineers monitor, diagnose and troubleshoot
their IT resources. Network engineers and IT operations staff
managing large networks would find this toolset very useful
and handy, especially during troubleshooting.
Using ManageEngine OpUtils, you can troubleshoot frequent
network problems such as network connectivity, availability,
health, and latency of any IP node in the network. It also
offers custom-made tools to manage DNS names, IP and MAC addresses,
fetch details about CPU, memory, software listing and more.
The SNMP tools help monitor any SNMP-enabled IP node, whereas
the Cisco tools help monitor Cisco-specific devices and nodes.
Graphs, charts, and tables provide real-time views of the
network and system information. Results can be exported as
reports in various formats such as PDF, HTML, and Excel spreadsheet.
ManageEngine OpUtils is totally web-based, so there is no
necessity of local installation. The IT operations staff can
install the toolset in any remote system and can connect using
any standard Web browser.
ManageEngine OpUtils Free and Professional Editions:
ManageEngine OpUtils' Free and Professional editions are
available in the web site for download. Click
here to view the difference between these editions.
ManageEngine OpUtils presents a rich set of diagnostic tools
that assist in network troubleshooting. The Ping
and the SNMP Ping
are graphical versions of the ICMP and SNMP Ping utilities.
The Enhanced
Ping is an improved version of the normal ICMP ping. The
Ping Scan fetches
a list of live IP nodes whereas the SNMP
Scan gets a list of live SNMP-enabled IP nodes. The Proxy
Ping tool helps initiating a Ping test from any remote
Cisco router, and the Trace
Route records the route through the network between the
sender's IP and any specified destination IP.
ManageEngine OpUtils offers intuitive tools for address monitoring.
The DNS
Resolver tool fetches the DNS name for any IP node and
vice versa. The MAC
address resolver can fetch the MAC Address for any node,
with the provided IP Address and vice versa. The Node
Calculator provides network data such as binary IP Address,
broadcast address etc. Subnet
List gives a list of all the subnets under which the given
node is present. The Subnet
Calculator is a utility to calculate or design sub-networks
based on a given IP Address or Netmask. The IP
Address Manager fetches the availability of IPs and helps
manage them using a pre-defined user policy in a static DNS
environment.
ManageEngine OpUtils' desktop monitoring tools help monitor
desktops and get various data like the system information,
CPU and disk space usage, process monitoring information,
list of installed software, and other general system details.
The Disk
Space Monitor displays the available and used memory space
in various drives of the system. The CPU
Monitor displays the usage of the CPU in a real-time scenario.
The Process
Scan tool lists all the processes running in the given
system. The Software
Scan tool lists the software installed in any machine.
The IP
Node Browser scans the given IP node and displays complete
information about it.
ManageEngine OpUtils' network monitoring toolset helps monitor
the performance of the devices, map the switch ports, and
scan through the IP nodes. A unique monitoring tool - Wake
On LAN remotely boots up a machine that is present in
the network, but is not alive. The Bandwidth
Monitor provides the average bandwidth utilization and
the percentage utilization in a graphical form. The Percentage
Utilization graphs display the Received Utilization and the
Transmitted Utilization. The Switch
Port Mapper is an auto-discovery layer2 and layer3 port-mapping
tool. It eliminates the need for manual tracing of cables
and presents all information on port mapping. The Performance
Monitor tool monitors routers, servers and other nodes
for utilization, packet flow, octet flow, add error and discards.
It presents a graphical representation of the performance
data using graphs and charts. The Network
monitor tool sends an alert after continuously monitoring
a node if the system stops performing or goes down. The various
alerts are colored differently to differentiate their criticality.
The Network
Scan is a utility to scan a network for retrieving network
data. The IP
Network Browser tool scans IP nodes and presents all the
device details.
ManageEngine OpUtils provides graphical interfaces for monitoring
Cisco routers. The Router
Snapshot tool provides a quick snapshot of the given Cisco
router. The Chassis
tool provides the chassis details about the Cisco router.
The Flash tool provides
the flash memory details of the Cisco router. The IOS
tool gets the details of the Internetwork Operation System
Software installed in a Cisco router. The IP
Routes tool provides the IP routing details of the Cisco
router. The Router
Monitor tool helps monitor the CPU utilization, memory
utilization, buffer miss rate, and buffer failures. The Interfaces
tool gives the list of interfaces, their type, IP Address,
physical address, bandwidth, maximum transfer unit, admin
status, and operational status. Access
Lists provide the access control lists that are built
into the router. The Config
File Viewer compares running Vs startup configs and displays
color-coded differences between them. It can also download
and take backup configurations,and print configurations.
ManageEngine OpUtils has two set of tools - one to browse through
various MIBs present in the MIB data base and the other to perform
SNMP operations on an SNMP node in a network. To locate the exact
MIB in which a particular OID is present, just provide the OID name
or Number to the MIB Node
Viewer tool. This will give you all information on the MIB,
parent node, OID type, syntax, and description on the given OID.
To view the defined attributes of a MIB, total number of nodes,
defined TCs, defined traps, and the general information on any MIB
you can use the MIB Module
Viewer. The SNMP Walker
enables viewing the data available through an SNMP agent in an IP
node. The tool helps in getting the values of all SNMP Variables
in the MIB subtree. The SNMP
Graph is a utility to gather real-time data and draw a graph
for any SNMP device using the available data. The Trap
Receiver tool listens for network traps and processes it. The
MIB Browser is a utility
that enables loading and browsing MIBs and allows you to perform
all SNMP-related operations like GET,SET, GET-BULK etc.
|
|
